Tuesday, February 26, 2008

No weld crank forward conversion part 2


Here is the other part of my mtb to CF confersion. Have about 10" riser under a pair of truncated 44cm wide drop bars. A quick test ride (of about 17 seconds) out in the dark street at 25 degrees f. shows the bike may have real promise as a comfort bike. Not nearly as laid back as CF2 or CF1 (farther down this page) but it has much more relaxed feel than the old mtb had and a person can easily stand on the pedals if one wishes to do so. Obviously, more testing is in order. One improvement I could make is in the steering riser as it is a very heavy part and could be redone in thin wall Cr-mo to knock off a pound or 2.

No comments: